How do I set up the fish-detecting operation?

The FishFinder sonar is ideal for locating fish up to 262 feet(100m) under the surface of the water. The following steps go through the basic set up of the operation

  1. Place the PowerSeeker into the water. You can tie the PowerSeeker using any fishing wire, and either just drop it into the water or cast it into the water.
  2. Open up the Wifi and select PSE_xxxxxx.
  3. Open up the Vision+ app, it will automatically switch to the PowerSeeker icon. Press “Start” button.
  4. Press the “Parameters” tile in the upper right corner of the screen.
  5. Select the “Basic” setting. From here, you can adjust the device to your specific needs.
  6. The PowerSeeker will start to feed data back to the Vision+ app.
  7. You will be able to read depth, temperature and bottom landscapes information.

The FishFinder will show fish icons of various sizes. The depth indicator will appear above each detected fish.

* If you have any questions while using the app or the PowerSeeker, don’t hesitate to contact us through our support website.

** If you have any questions regarding to the usage with PowerRay, please refer to the PowerRay support page, there’s a PowerSeeker section addressing the connection between PowerRay and PowerSeeker.

Modified on: 2019-05-27 16:34

PowerVision Contact Info

After Sales & Technical Support

sea@powervision.me

Phoneline Operating Hours: Monday - Friday - 9:00 - 17:00

Supported Language: English